What is the reason for the poor packaging effect of the baler? In fact, there are many reasons to form, there will be many ways of expression, the following will be for everyone to popular science science about the baler packing effect is not good details of what!

1. Improper conditioning of binding force

There are two reasons for this situation of the baler, one is that the binding force is too large, mainly manifested as the packing belt of the baler is deeply trapped in the carton, which will pull the packaged items bad; The other is that the binding force is too small, and its performance is that the packing belt is loose and cannot play the role of binding.

2, the bonding effect is not good

The poor bonding effect is not complete, indicating that the baler has problems, and it may be that the quality of the packaging belt itself is not good, which will also form such a result. But if this situation is eliminated, then there may be a problem with the baler perm, either the temperature is too high to heat the two layers of the packaging belt, or the perm temperature is too low, and the packaging belt is not fully hot.

3, the tape cutting effect is not good

A packing process should be good belt cutting and good adhesion, but if the baler is used for too long or is seriously worn, there will be bad packaging belt cutting, which seriously affects the packaging effect.