Because the technology of the thermal shrink packaging machine is improving from time to time, and the foreign operation industry is also increasing from time to time, the application scope of the thermal shrink packaging machine is expanding from time to time, the market demand for this aspect is growing, but because many customers do not understand the operation of this product, resulting in the formation of mistakes in the operation process, attracting a lot of unnecessary trouble.

1, because the power consumption of the heat shrink packaging machine is relatively large, the power of the input power must be greater than the nominal power of the equipment name, otherwise it is easy to burn the line or electrical components.

2, each machine is equipped with a cable connecting to the power supply, the end lead local with the identification symbol of the power supply, must be correctly connected, illegal operation may lead to electric shock.

3, in order to prevent the heat circulation fan (motor) from overheating and burning under the condition of frequent starting, pay attention to the limit of continuous working time of the machine when using: when the packaging speed is 12 seconds/piece, it can work continuously for about 6 hours, when the packaging speed is 6 seconds/piece, it can work continuously for about 3 hours, and so on. Of course, the above time is also related to environmental temperature and other factors, and can be disposed of according to the practical heating condition of the motor.

4, when the regular voltage of the machine is three-phase 380V power supply, it is necessary to input the neutral line at the same time, that is, the standard three-phase four-wire system and other packaging equipment. Otherwise, the machine cannot work normally, and it is easy to burn the internal electrical components.

5. When the machine is working, because the outer temperature of the sealing blade and other heating parts is very high, it must not be touched by hand or other items, otherwise there is the risk of burns or damage.

6, the machine must be a degree of device, firmly grounded, otherwise it will shorten the service life of the electric heat pipe. The tilting device will cause the belt to deviate from the center of the machine.

7, when the machine is working, the operator's palm and other parts are not allowed to contact the operating parts of the machine, especially the temperature of the contraction room is very high, it is easy to burn.

In addition to the above introduction, there are a lot of precautions about the operation of heat shrink packaging, here is only for some of the more common problems are summarized, if you want to have a deeper understanding of the technology or operation of the product, you can contact us, we will be your every problem can be properly handled.