Heat shrink packaging machine is one of the most advanced packaging machines in the market, which is loved by a wide range of customers. The use of heat shrink packaging machine is very large, but customers will often encounter some problems when using heat shrink packaging machine. The following is a summary of some common heat shrink packaging machine problems.

1, when the heat shrink packaging machine is in packaging production, the temperature of the packaging part is slow or can not reach the standard packaging temperature (above 160 ° C), the packaging can not reach the expected packaging effect, how to do?

Treatment method: First of all, check the main power supply line of the heater, the heater line is the main power line through a magnetic switch and then to the electric heat pipe, so it should first detect whether the contacts of the magnetic switch are normal.

2, when the equipment is working, the film material is easy to offset and can not be fed normally, so that the heat shrink packaging machine can not normally perform heat shrink packaging on the object, how to adjust?

Treatment method: can adjust the film roll position and tension balance rod, if both are ineffective, can be adjusted by the Angle of the triangle plate to deal with. If the upper film material deviates from the clamping chain, the upper triangle plate can be adjusted in a clockwise direction; If the following layer of film material deviates from the clamping chain, the upper triangle plate can be adjusted in a counterclockwise direction. This will handle the problem.

3, in the multi-object cluster packaging, the equipment can not detect the packaged object, packaging damage to the packaging, so that the packaging work can not be carried out, how to do?

Treatment: This situation is due to the fact that the gap between the objects in the middle of the thermal shrink packaging machine affects the detection of the electric eye when the cluster packaging machine is stopped, and only the electric eye detection Angle of the thermal shrink packaging machine is adjusted to an oblique Angle to prevent the above phenomenon.

逐句对照