The sealing machine equipment does not suddenly appear, often after a very long period of evolution, and the last touch, so how do we find the problem before the failure of the sealing machine?

1. Listen to the sound, the ordinary simple fault is due to the loosening of the Mo parts or the formation of foreign bodies, and the abnormal sound is like the signal sent by the sealing machine, and the sealing machine is checked in time.

2. Look at the appearance, pay more attention to the appearance of the sealing machine and the wear condition of the components, and replace the vulnerable parts in time

3. Touch the details. This is important because it tells you which parts of your body are no longer working.

In addition to the above inspection, see the bottom sealing machine wool failure and treatment methods

1. The clamping action of the sealing machine is too slow or the clamping stroke is lack: the bolt is loose, the front buckle or the inner piece of the plate is worn. At this point, the bolt can be tightened, paying attention to the correct position of the front buckle. It can also change the front buckle or the inner piece of the plate, after completion, test its function, if the stroke is too short, fine tune the front buckle shaft upward, if the action is slow, fine tune the front buckle shaft downward;

2. Gas leakage at the piston rod: the bottom ring of the main body is damaged. The ring should be replaced at this time.

3. Air leakage at the exhaust port: the switch valve ring or switch seat ring is damaged or the piston ring is damaged. Change the ring.

4. Air leakage at the trigger: the switch valve ring or switch seat ring is damaged. Change the ring.

5. The transmission ring is loose and cannot be located: the plastic steel bar and the transmission spring are not elastic. Remove the plate assembly and reinstall the spring tip or replace the plastic steel bar and transmission spring