Release date:2023-08-08
The carton baler has it to make you easier
The carton baler is a capacity reduction compressor equipment for waste paper and carton packing. It can be divided into hydraulic tightening, pneumatic tightening and manual tightening. The manual tightening operation method of the carton baler is explained here.
1, first check whether the equipment can be used normally, and then turn the manual baler press plate to the right side.
2. Fill the trash bag in the press bin of the carton packing machine, and fasten the trash bag to prevent the trash bag from falling apart during the process of shrinking the trash.
3. Put the dregs and waste paper into the tightening bin until the bin is full.
4 Turn the pressure plate back to the top of the press bin, pull the positioning element, and the pressure plate will automatically tighten
5. After the pressure plate compresses the dregs and waste paper into place, manual rotation compresses the return positioning.
6, repeated feeding, tightening and recycling carton until the waste bag is full, the press plate is positioned, the bin lock is opened, the compressed waste bag is moved out of the press bin, and the manual baling machine is completed to tighten the waste and use the waste. Carton sealing machine product potential
1. Carton sealing machine is easy to operate
After the carton is sealed up and down in the middle of the automatic tape sealing machine in the front section, it enters the 90-degree corner machine and pushes the corner edge sealing machine through the box pushing plate. After photoelectric detection, the machine automatically adjusts the width and height of the machine according to the carton specifications. Carton sealing machine without manual conditioning machine, simple, convenient, fast.
2, carton sealing machine fully automated:
Carton sealing machine is fully automated, fast, greatly save manpower, can be combined with GPE, GPI model online to complete the I-box sealing, can also be used with automated packaging line (carton sealing machine)
Some people in the purchase of plastic baler accessories, when using it to pack, they will find that they will appear uneven thickness problems, and once this problem occurs, then in the packaging, it will certainly affect the quality of its use, and what is the reason for the existence of this problem, today and Xiaobian together to see!
The uneven thickness of the parts of the plastic baler mainly lies in the uneven melting state of the raw materials, which produces different density and hardness. In the later period of extrusion, it is easy to attack the uneven thickness. If we want to avoid this situation, we should control the time and temperature in the process of operating the raw materials to ensure that the melting degree of the raw materials is intact.