What are the common maintenance methods of the packaging machine? Let's take a look at it.

The use of the machine is very common, but if the maintenance is not in place, there will be some small problems, affecting the efficiency and process of the packaging.

First, before starting, check whether the automatic packaging machine parts are intact, whether the screws and nuts of each part can be loosened, if there should be timely tightening. If there is a lack of nails less cap phenomenon, to notify the repair personnel timely disposal.

Second, after the long-term use of the automatic packaging machine, our operators should smooth the various parts of the packaging machine to ensure that the various parts can work normally.

Third, check the cutting tool group, if not sharp, please change in time. At the same time, it is necessary to use the dipping method to refuel the cutting tool transmission part, dip a small stick in the oil, gradually drop on the top, can not be poured into the conveyor rail, otherwise the packaging belt will slip.

Fourth, the workshop personnel in the automatic packaging machine maintenance, each time to record the fault of the machine, in order to facilitate future inquiries.

Fifth, check whether the feeding screw local abnormal infarct (there is no debris), infarct if there is debris to be cleared with compressed air to blow the dust inside the track or clean water.

Six, if there is an abnormal phenomenon during the boot process. Such as: loud sound, large vibration, odor, etc., if I can not find, should stop to notify the repair personnel to dispose of, so as not to form parts damage.

逐句对照